Semi Gloss Sealer
Semi Gloss Sealer

Semi Gloss Sealer

Pureco Semi Gloss/ Eggshell Sealer Is designed for use over any of our paints, sealing transfers and decoupage. 

Pureco Semi Gloss Sealer is easy clean, self levels for use on interiors, exteriors and water clean up.

It can be tinted with any of our paint colours and used as a glaze. 

How to use - Stir with a broad stirrer, ensure your surface is dry, clean & dust free.

Always do a test patch to see if this product is right for your project.

Apply a single coat with Pureco Sponge Applicator, broad brush, sprayed or if easier it can be applied with a lint free damp cloth.

Allow your first coat to dry thoroughly before applying your next coat.

Coverage is 13 square metres per litre, depending on application technique and surface roughness.

Can be used for gluing down & sealing wallpaper. This product should not be used if air temperature is below 10 degrees or above 35 degrees. 

Use in a well ventilated area. Water clean up. 100% washable.

600ml or 200ml 
DetailsOur Sealers
Sizes600ml,200ml, 50ml/ 500ml, 125ml/200g,100g
PrimerNo Primer is needed.
BasesOur Clear Sealers come in Matte, Satin, Semi Gloss & Gloss Finish.
Our Liquid Wax comes in 500ml & 125ml.
Our Beeswax Polish comes in 200g & 100g.
Our Hemp Oil comes in 500ml & 125ml.
Drying Times Drying times will vary dependant on climate. Humidity will increase cure time.
Most products will be fully cured between 7-21 days.
Cured is when every drop of liquid is thoroughly evaporated and only the coating is left.
Coverage200ml will cover approx 2-3 square metres and 600ml will cover approx 7-8 square metres in normal conditions.