Lead - Silk Finish
Lead - Silk Finish
Lead - Silk Finish
Lead - Silk Finish

Lead - Silk Finish

$42.00

old carpenter pencils, wood charcoal and tarnished silver.

Pureco Silk Finish range is 100% washable and easy to use.

It is the perfect choice for those who like to paint and go, more suited to smooth clean looks than textured looks.

Amazing self levelling properties with a satin sheen finish.

How to Use -

Always do a test patch to see if this product is right for your project.

Easy to clean and stain-resistant finish.

Clean substrate, sand flaking paint off, lightly scuff shiny surfaces to promote adhesion.

Prime using Pureco Base & Blocker & Paint

For best results use a synthetic smooth brush in nice even smooth strokes.

Sealing, waxing and top coating are not required.

In some cases, you may find some substrates may have tannin bleed-through.
Should this happen, use our base & blocker to prevent further staining.

200ml will cover approx 2-3 square metres and 600ml will cover approx 7-8 square metres in normal conditions.

This will definitely depend on the colour choice, whites will require more coats hence cover less square metres.

Able to be shabbied up as you do with Chalk paints. note- the Silk Finish range has a built in sealer, our sealers can certainly be used on top for extra durability.

Our waxes are not suitable to use as they will tend just slide around and not absorb into the coating.

Easy clean up with water for brushes, rollers and spray equipment.

Details Our Paint Ranges
Sizes600ml, 200ml, 50ml
PrimerBase & Blocker is recommended under our Silk Range.
Our Chalk Range needs no primer unless you think light bleed through (tannin showing).
Find them here
BasesOur Paints come made on 3 different bases depending on colour intensity -
**Clear base - will need an extra coat for full opaque finish
*Light base - may need an extra coat for full opaque finish 
White base - will give full opaque finish in 2 coats depending on individual techniques this extcludes our Snow (our pure white)
SealersWe make 4 Sealers, Liquid Wax, 12 Glazes and 7 waxes.
All will seal our Chalk Range beautifully. 
Find them here
Drying Times Drying times will vary dependant on climate. Humidity will increase cure time.
Most products will be fully cured between 7-21 days.
Cured is when every drop of liquid is thoroughly evaporated and only the coating is left.
Coverage 200ml will cover approx 2-3 square metres and 600ml will cover approx 7-8 square metres in normal conditions. This will definately depend on the colour choice, whites will require more coats hence cover less square metres.
This will definitely depend on the colour choice, whites will require more coats hence cover less square metres.